生物传感器快速测定BOD系统的稳定性研究

中国生物工程杂志

研究报告

生物传感器快速测定BOD系统的稳定性研究

王建龙陈劲松张力生魏国

清华大学核能与新能源技术研究院环境技术研究室信阳师范学院生命科学学院信阳师范学院生命科学学院信阳师范学院生命科学学院

The stability of rapid BOD analysis by biosensor

全文: PDF HTML

摘要： 在前期研究工作的基础上，确定了生物传感器快速测定BOD的实验流程。研究了温度对检测结果的影响，初始BOD浓度与检测时间的关系，并探讨了检测结果的重现性及其线性范围。结果表明：恒温环境可以保持微生物活性的相对稳定，并保证了检测过程的相对稳定，检测结果的最大相对偏差7.7%，满足BOD快速测定的要求；溶液BOD浓度不同，所需的检测时间也不同，BOD浓度越高，所需时间越长。在曝气状态下，可以保证BOD浓度在200mg/l以下的样品在15min以内检测完毕。通过对线性范围的分析，该方法适宜的线性范围可达5－200mg/l。

Abstract: Based on the previous research results, a flow chart for BOD rapid analysis was determined. The effects of temperature on the stability of measurement result and the initial BOD concentration on measurement time were investigated. The reproducibility of the results and the linear range were also studied. The experimental results indicated that constant temperature could keep the initial DO and the microbial activity relatively stable and guarantee the stability of measurement. The maximal relative error was less than 7.7%, which meet the needs of BOD rapid analysis. It took different time for determining samples containing different BOD values, however, it took less than 15 min at the initial BOD value below 200 mg/l. The linear range for BOD rapid measurement using this system was between 5-200 mg/l.

收稿日期: 2006-08-07 出版日期: 2006-11-25

通讯作者: 王建龙

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	陈劲松
	魏国
	张力生
	王建龙

引用本文:

王建龙,陈劲松,张力生,魏国. 生物传感器快速测定BOD系统的稳定性研究[J]. 中国生物工程杂志, .

. The stability of rapid BOD analysis by biosensor. China Biotechnology, .

链接本文:

https://manu60.magtech.com.cn/biotech/CN/ 或 https://manu60.magtech.com.cn/biotech/CN/Y2006/V26/I11/62

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed