Orginal Article |
|
|
|
|
The Application of Piezoelectric Micro-jetting Technology in the Field of Cell Bioprinting |
SUN Huai-yuan1,**(),SONG Xiao-kang2,LIAO Yue-hua1,LI Xiao-ou1 |
1 Medical Instrument College, Shanghai University of Medicine & Health Sciences, Shanghai 201318, China; 2 College of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China |
|
|
Abstract The process of cell acquisition and culture is an important part of tissue engineering construction. Three-dimensional bioprinting technology can support the development of tissue engineering. Piezoelectric micro-jetting realize pulsating flow of trace fluid under the interaction of the inertial force and fluid viscous force by “sound wave”, its application in the field of cell bioprinting belongs to the emerging technology, and it has the characteristics of high precision, high efficiency as well as low cost. Based on the introduction of micro-jetting technology system and principle, the effects of piezoelectric drive mode, piezoelectric parameters, pulse drive voltage waveform and bio-cell ink on cell bioprinting were analyzed, the cases studied of piezoelectric micro-jetting technology in high livability cell acquisition and efficient construction of cell three-dimensional tissue were provided, its application status in the field of cell bioprinting and research direction as well as significance were summarized.
|
Received: 30 July 2018
Published: 10 January 2019
|
|
Corresponding Authors:
Huai-yuan SUN
E-mail: shy62123@163.com
|
|
|
[1] |
金灿,陈振琦.应用3D打印技术制作组织工程支架:修复骨缺损的研究回顾.中国组织工程研究,2017,21(10):1611-1616.
|
|
|
[1] |
Jin C,Chen Z Q.Tissue-engineered scaffold preparation using three-dimensional printing technology:a retrospective study on bone repair.Chinese Journal of Tissue Engineering Research,2017,21(10):1611-1616.
|
|
|
[2] |
曹雪飞,宋朋杰,乔永杰,等.3D打印骨组织工程支架的研究与应用.中国组织工程研究,2015,19(25):4076-4080.
|
|
|
[2] |
Cao X F,Song P J,Qiao Y J,et al.3D printing of bone tissue engineering scaffolds.Chinese Journal of Tissue Engineering Research,2015,19(25):4076-4080.
|
|
|
[3] |
王雪欣,张明谏,李小兵,等.3D生物打印在组织/器官类似物制造领域的应用.中国组织工程研究,2018,22(10):1611-1617.
|
|
|
[3] |
Wang X X,Zhang M J,Li X B,et al.Three-dimensional bioprinting of tissue/organ analogues:a review on techniques,materials and processes.Chinese Journal of Tissue Engineering Research,2018,22(10):1611-1617.
|
|
|
[4] |
徐弢. 生物3D 打印在神经科学领域的最新进展.中华神经创伤外科电子杂志,2018,4(2):65-67.
|
|
|
[4] |
Xu T.The latest advances of biological 3D printing in the field of neuroscience.Chin J Neurotrauma Surg (Electronic Edition),2018,4(2):65-67.
|
|
|
[5] |
韩倩宜,李淑萍,肖雄夫,等.3D打印技术在植入式医疗器械中的应用.科技导报,2017,35(2):72-79.
|
|
|
[5] |
Han Q Y,Li S P,Xiao X F,et al.3D Printing:The application in medicine devices.Science &Technology Review,2017,35(2):72-79.
|
|
|
[6] |
杨润怀,陈月明,马长望,等.生物细胞三维打印技术与材料研究进展.生物医学工程学杂志,2017,34(2):320-324.
|
|
|
[6] |
Yang R H,Chen Y M,Ma C W,et al.Research progress on the technique and materials for three-dimensional bio-printing.Journal of Biomedical Engineering,2017,34(2):320-324.
|
|
|
[7] |
Gu Q,Hao J,Lu Y J,et al.Three-dimensional bio-printing.Sci China Life Sci,2015,58(5): 411-419.
|
|
|
[8] |
魏玉雪,刘晓秋,李迪,等.3D打印技术在细胞打印方面的应用与发展.海南医学,2017,28(5): 801-804.
|
|
|
[8] |
Wei Y X,Liu X Q,Li D,et al.Application and development of 3D printing technology in cell printing.Hainan Med J,2017,28(5):801-804.
|
|
|
[9] |
周丽宏,陈自强,黄国友,等.细胞打印技术及应用.中国生物工程杂志,2010,30(12):95-104.
|
|
|
[9] |
Zhou L H,Chen Z Q,Huang G Y,et al.The application of cell bioprinting . China Biotechnology,2010,30(12):95-104.
|
|
|
[10] |
Sivaraman A,Leach J K,Townsend S,et al.Am icroscale in vitro physiolog icalmodel of the liver:predictive screen s for drug metabolism and enzyme induction.Current Drug Metabolism,2005,6(6): 569-592.
doi: 10.2174/138920005774832632
pmid: 16379670
|
|
|
[11] |
叶青,王文军,鱼泳,等.3D生物打印在再生医学中的应用及展望.医疗卫生装备,2016,37(10):121-123.
|
|
|
[11] |
Ye Q,Wang W J,Yu Y,et al.Application and prospects of 3D bioprintnig in regenerative medicine . Chinese Medical Equipment Journal,2016,37(10):121-123.
|
|
|
[12] |
蔡仁烨. 细胞打印过程中的细胞受损分析.西安:西安电子科技大学,2013.
|
|
|
[12] |
Cai R Y.Cell damage analysis in cell printing. Xi’an:Xidian University,2013.
|
|
|
[13] |
Xu C,Zhang M,Huang Y,et al.Study of droplet formation process during drop-on-demand inkjetting of living cell-laden bioink.Langmuir,2014,30(30) :9130-9138.
doi: 10.1021/la501430x
pmid: 25005170
|
|
|
[14] |
Kim Y K,Park J A,Yoon W H,et al.Drop-on-demand inkjet-based cell printing with 30-μm nozzle diameter for cell-level accuracy.Biomicrofluidics,2016,10 (6):064110.1-064110.11.
doi: 10.1063/1.4968845
pmid: 27990212
|
|
|
[15] |
Kim J D,Choi J S,Kim B S,et al.Piezoelectric inkjet printing of polymers:stem cell patterning on polymer substrates.Polymer(Guildf),2010,(51):2147-2154.
doi: 10.1016/j.polymer.2010.03.038
|
|
|
[16] |
Ng W L,Yeong W Y,Naing M W,et al.Polyvinylpyrrolidone-based bio-ink improves cell viability and homogeneity during drop-on-demand printing.Materials,2017,10(2):190.1-190.12.
doi: 10.3390/ma10020190
pmid: 5459162
|
|
|
[17] |
Lee J H,Gu Y,Wang H,et al.Microfluidic 3D bone tissue model for high-throughput evaluation of wound-healing and infection-preventing biomaterials .Biomaterials,2012 ,33(4) :999-1006.
doi: 10.1016/j.biomaterials.2011.10.036
pmid: 22061488
|
|
|
[18] |
Zhang J,Chen F,He Z,et al.A novel approach for precisely controlled multiple cell patterning in microfluidic chips by inkjet printing and the detection of drug metabolism and diffusion.Analyst,2016,141(10) :2940.
doi: 10.1039/c6an00395h
pmid: 27045202
|
|
|
[19] |
The R,Yamaguchi S.Piezoelectric inkjet-based single-cells printing by image processing for high efficiency and automatic cell printing//17th International Conference on Miniaturized,2013:1656-1658.
|
|
|
[20] |
Yamaguchi S,Ueno A,Akiyama Y,et al.Cell patterning through inkjet printing of one cell per droplet.Biofabrication,2012,4(4):045005.
doi: 10.1088/1758-5082/4/4/045005
pmid: 23075800
|
|
|
[21] |
Kang W S,Koh J H.(1-x)Bi0.5Na0.5TiO3-TiO(3)lead-free piezoelectric ceramics for energy-harvesting applications.Materials Science,2015,(5):2057-2064.
doi: 10.1016/j.jeurceramsoc.2014.12.036
|
|
|
[22] |
Zhang M,Song H T,Xu C X.Study of living cell distribution during inkjet printing of bioink//Proceedings of the asme international manufacturing science and engineering conference 2017.Los Angeles,USA:MSEC,2017:2921.
|
|
|
[23] |
Saunders R E,Gough J E,Derby B.Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing.Biomaterials,2008,(29):193-203.
doi: 10.1016/j.biomaterials.2007.09.032
pmid: 17936351
|
|
|
[24] |
Gan H Y,Shan X C,Eriksson T,et al.Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation.Journal of Micromechanics and Microengineering,2009,(19):055010.1-055010.8.
doi: 10.1088/0960-1317/19/5/055010
|
|
|
[25] |
Kwon K S,Kim W.A waveform design method for highspeed inkjet printing based on self-sensing measurement.Sensors and Actuators,2007,(4):75-83.
doi: 10.1016/j.sna.2007.06.010
|
|
|
[26] |
Lee Y I,Kwon Y T,Lee K J,et al.A novel method for fine patterning by piezoelectrically induced pressure adjustment of inkjet printing.Electronic Materials,2015,44(8):2608-2614.
doi: 10.1007/s11664-015-3675-y
|
|
|
[27] |
夏京瑞,周奕华,钱俊,等.基于细胞打印的压电式喷墨头研究进展.包装工程,2016,37(9):129-133,155.
|
|
|
[27] |
Xia J R,Zhou Y H,Qian J,et al.Research progress of piezoelectric inkjet head based on cell printing.Packaging Engineering,2016,37(9):129-133,155.
|
|
|
[28] |
Fromm J E.Numerical-calculation of the fluid-dynamics of drop-on-demand jets.IBMJ Res Dev,1984,28(3):322-333.
doi: 10.1147/rd.283.0322
|
|
|
[29] |
Reis N,Ainsley C,Derby B.Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors.Journal of Applied Physics,2005,97(9) :815.
doi: 10.1063/1.1888026
|
|
|
[30] |
Derby B.Inkjet printing of functional and structural materials:fluid property requirements,feature stability,and resolution.Annu Rev Mater Res,2010,(40):395-414.
doi: 10.1146/annurev-matsci-070909-104502
|
|
|
[31] |
Jang D,Kim D,Moon J.Influence of fluid physical properties on ink-jet printability.Langmuir,2009,25(5):2629-2635.
doi: 10.1021/la900059m
pmid: 19437746
|
|
|
[32] |
Chahal D,Ahmadi A,Cheung K C.Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions.Biotechnology & Bioengineering,2012,109(11):2932-2940.
doi: 10.1002/bit.24562
pmid: 22627805
|
|
|
[33] |
Moon S,Ceyhan E,Gurkan U A,et al.Statistical Modeling of single target cell encapsulation.PLoS One,2011,(6):e21580.
doi: 10.1371/journal.pone.0021580
pmid: 21814548
|
|
|
[34] |
Liberski A R,Schubert U S.One cell-one well:A new approach to inkjet printing single cell microarrays.ACS Combinatorial Science,2010,(13);190-195.
doi: 10.1021/co100061c
pmid: 21395345
|
|
|
[35] |
Cheng E,Yu H,Ahmadi A,et al.Rheological manipulation for improved reliability in inkjet printing of living cells//2016 IEEE 29th International Conference on Micro Electro Mechanical Systems.Shanghai,China:IEEE,2016:784-787.
|
|
|
[36] |
Cheng E,Ahmadi A,Cheung K C.Investifation of the hydrodynamics of suspended cells for reliable inkjet cell printing /ASME 2014 12th International Conference on Nanochannels,Microchannels,and Minichannels.Chicago,USA:Asme International Conference on Nanochannels 2014:V001T03A010.
|
|
|
[37] |
Ferris C,Gilmore K,Beirne S,et al.Bio-ink for on-demand printing of living cells.Biomaterials Science,2013,1(2) :224-230.
doi: 10.1039/c2bm00114d
|
|
|
[38] |
Cui X,Dean D,Ruggeri M.Cell damage evaluation of thermal inkjet printed chinese hamster ovary cells.Biotechnology & Bioengineering,2010,106(6):963-969.
doi: 10.1002/bit.22762
pmid: 20589673
|
|
|
[39] |
Ozbolat I,Yu Y.Bioprinting toward organ fabrication:Challenges and future trends.IEEE Transactions on Biomedical Engineering,2013,60(3) :691-699.
doi: 10.1109/TBME.2013.2243912
pmid: 23372076
|
|
|
[40] |
Ringeisen B R,Pirlo R K,Wu P K,et al.Cell and organ printing turns 15:Diverse research to commercial transtitions.MRS Bull,2013,(38):834-843.
|
|
|
[41] |
Xu T,Joyce J,Cassie G,et al.Inkjet printing of viable mammalian cells.Biomaterials,2005,26(1):93-99.
doi: 10.1016/j.biomaterials.2004.04.011
pmid: 15193884
|
|
|
[42] |
Lorber B,Hsiao W K,Hutchings I M,et al.Adult rat retinal ganglion cells and glia can be printed by piezoelectric injet printing.Biofabrication,2014,6(1):152-163.
doi: 10.1088/1758-5082/6/1/015001
pmid: 24345926
|
|
|
[43] |
Detsch R,Blob S,Zehnder T,et al.Evaluation of cell inkjet printing technique for biofabrication.BioNanoMat,2016,17(3):185-191.
|
|
|
[44] |
Zhang X,Catalano P N,Gurkan U A,et al.Emerging technologies in medical applications of minimum volume vitrification.Nanomedicine,2011,(6):1115-1129.
doi: 10.2217/nnm.11.71
pmid: 3193162
|
|
|
[45] |
Yong K W,Safwani W K,Xu F,et al.Assessment of tumourigenic potential in long-term cryopreserved human adipose-derived stem cells.Journal of Tissue Engineering and Regenerative Medicine,2016,11(8) :2217-2226.
doi: 10.1002/term.2120
pmid: 26756982
|
|
|
[46] |
Dou R,Saunders R E,Mohamet L,et al.High through put cryopreservation of cells by rapid freezing of sub-μl drops using inkjet printing-cryoprinting.Lab Chip,2015,(15):3503-3513.
|
|
|
[47] |
Dimasi J A,Feldman L,Seckler A,et al.Trends in risks associated with new drug development:Success rates for investigational drugs.Clin Pharmacol Ther,2010,87(3) :272.
doi: 10.1038/clpt.2009.295
pmid: 20130567
|
|
|
[48] |
Hay M,Thomas D W,Craighead J L,et al.Clinical development success rates for investigational drugs.Nature Biotechnology,2014 ,32(1) :40-51.
doi: 10.1038/nbt.2786
pmid: 24406927
|
|
|
[49] |
Park T M,Kang D,Jang I,et al.Fabrication of in vitro cancer microtissue array on fibroblast-layered nanofibrous membrane by inkjet printing.International Journal of Molecular Sciences,2017,18(11):2348.
doi: 10.3390/ijms18112348
pmid: 29112150
|
|
|
[50] |
Cohen D L.Direct freeform fabrication of seeded hydrogels in arbitrary geometries.Tissue Engineering,2006,(12):1325-1335.
|
|
|
[51] |
Jakab K.Three-dimensional tissue constructs built by bioprinting.Biorheology,2006,(43):509-513.
doi: 10.1016/S0022-3093(00)00207-6
pmid: 16912422
|
|
|
[52] |
Ozbolat I T,Hospodiuk M.Current advances and future perspectives in extrusion-based bioprinting.Biomaterials,2016,(76):321-343.
doi: 10.1016/j.biomaterials.2015.10.076
pmid: 26561931
|
|
|
[53] |
Visser J.Biofabrication of multi-material anatomically shaped tissue constructs.Biofabrication,2013,(5):035007.
|
|
|
[54] |
Faulkner-jones A,Fyfe C,Cornelissen D J,et al.Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for generation of mini-livers in 3D.Biofabrication,2015,7(4):044102.
doi: 10.1088/1758-5090/7/4/044102
pmid: 26486521
|
|
|
[55] |
Zhang J,Hartmann B,Siegel J,et al.Sacrificial-layer free transfer of mammalian cells using near infrared femtosecond laser pulses.PLoS ONE,2018,13(5):e0195479.
doi: 10.1371/journal.pone.0195479
pmid: 29718923
|
|
|
[56] |
Koch L,Deiwick A,Chichkov B.Laser-based 3D cell printing for tissue engineering.BioNanoMaterials,2014,(15):71-78.
|
|
|
[57] |
Xiong R,Zhang Z,Chai W,et al.Study of gelatin as an effective energy absorbing layer for laser bioprinting.Biofabrication,2017,(9):24103-24117.
doi: 10.1088/1758-5090/aa74f2
pmid: 28597844
|
|
|
[58] |
Huang T Q.3D printing of biomimetic microstructures for cancer cell migration.Biomed Microdevices,2014,(16):127-132.
doi: 10.1007/s10544-013-9812-6
pmid: 3945947
|
|
|
[59] |
Cui X,Gao G,Qiu Y.Accelerated myotube formation using bioprinting technology for biosensor applications.Biotechnology Letters,2013,35(3):315-321.
doi: 10.1007/s10529-012-1087-0
pmid: 23160742
|
|
|
[60] |
Christensen K,Xu C,Chai W,et al.Freeform inkjet printing of cellular structures with bifurcations.Biotechnology & Bioengineering,2015,(112):1047-1055.
doi: 10.1002/bit.25501
pmid: 25421556
|
|
|
[61] |
Suntivich R,Drachuk I,Calabrese R.Inkjet printing of silk nest arrays for cell hosting.Biomacromolecules,2014,15(4):1428-1435.
doi: 10.1021/bm500027c
pmid: 24605757
|
|
|
[62] |
Owens C M,Marga F,Forgacs G.Biofabrication and testing of a fully cellular nerve graft.Biofabrication,2013,5(4):380-387.
doi: 10.1088/1758-5082/5/4/045007
pmid: 24192236
|
|
|
[63] |
Lee V,Singh G,Trasatti J P,et al.Design and fabrication of human skin by three-dimensional bioprinting.Tissue Eng Part C Methods,2014,20(6):473-484.
|
|
|
[64] |
Xu T,Binder K W,Albanna M Z,et al.Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications.Biofabrication,2013,5(1):1-10.
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|