|
|
The Application of Cell Bioprinting |
ZHOU Li-hong1, CHEN Zi-qiang1, HUANG Guo-you1, ZHAI Xiao1, CHEN Yong-mei2, XU Fong3, LU Tian-jian4 |
1. Biomedical Engineering and Biomechanics center, School of Aerospace, Xi’an Jiaotong University, Xi’an 710049, China;
2. Key laboratory for Non equilibrium condensed matter and Quantum engineering of Ministry of Education,School of Science,Xi’an 710049,China;
3. HST-Center for Biomedical Engineering,Department of Medicine, Brigham and Women’s Hospital,Harvard Medical School, Boston 510660, MA,USA;
4. Biomedical Engineering and Biomechanics Center, School of Aerospace, Xi’an Jiaotong University, Xi’an 710049, China |
|
|
Abstract Cell bioprinting can be defined as an advanced technology that fabricates 3D functional multi-cellular tissue in vitro. Due to its interdisciplinary characteristics, high resolution, cell bioprinting has been of considerable importance and popularity in recently. It is a powerful technology for tissue engineering and biological studies. Rather than a single approach, cell bioprinting includes a set of techniques (e.g. inkjet bioprinting, laser based techniques) that transfer biologically materials onto a substrate. Cell bioprinting also provides a new concept that how to construct more naturally 3D tissues or organs in vitro. The principle of these techniques was introduced, An overview of cell bioprinting in biological engineering applications, such as building 3D micro tissue, investigating cell biology, fabricating cell based microarray was also presented.
|
Received: 28 July 2010
Published: 25 December 2010
|
|
|
|
[1] |
Mironov V, Kasyanov V, Drake C, et al. Organ printing: promises and challenges. Regenerative Medicine, 2008, 3(1): 93-103.
|
|
|
[2] |
Nakamura M, Kobayashi A, Takagi F, et al. Biocompatible inkjet printing technique for designed seeding of individual living cells. Tissue Eng, 2005, 11: 1658-1666.
|
|
|
[3] |
Mironov V, Kasyanov V, Markwald R, et al. Bioprinting: Directed tissue self-assembly. Chem Eng Prog, 2007, 103: 12(Suppl): 12-17.
|
|
|
[4] |
Mironov V, Visconti R P, Kasyanov V, et al. Organ printing: Tissue spheroids as building blocks. Biomaterials, 2009, 30(12): 2164-2174.
|
|
|
[5] |
刘海霞, 颜永年. 组织器官的修复与重建. 科学技术与工程, 2005, 5: 36-43. Liu H X, Yan, Y N. Science Technology and Engineering, 2005,5:36-43.
|
|
|
[6] |
Jakab K, Damon B, Neagu A, et al.Three-dimensional tissue constructs built by bioprinting. Biorheology, 2006, 43: 509-513.
|
|
|
[7] |
Calvert P. Materials science: printing cells. Science, 2007, 318(5848): 208-209.
|
|
|
[8] |
Burg T, Groff R, Burg K, et al. Systems engineering challenges in inkjet biofabrication. IEEE Proceedings, 2007, 395-398.
|
|
|
[9] |
颜永年, 刘海霞, 李生杰, 等. 生物制造工程的发展和趋势. 中国科学基金, 2007, 6: 65-69. Yan Y N, Liu H X, Li S J, et al. Science foundation in China, 2007,6:65-69.
|
|
|
[10] |
Basu S, Gerchman Y, Collins C H, et al. A synthetic multicellular system for programmed pattern formation. Nature, 2005, 434(7037):1130-1134.
|
|
|
[11] |
Hotary K B, Allen E D, Brooks PC, et al. Membrane type I matrix metalloproteinase usurps tumor growth control imposed by the three-dimensional extracellular matrix. Cell, 2003, 114(1): 33-45.
|
|
|
[12] |
Xu M, Yan Y, Zhang R, et al. Establishing a multicellular model by three-dimensional cell-assembly technique for metabolic syndrome. Nature Preceding, 2008,1(1):496.
|
|
|
[13] |
Sivaraman A, Leach J K, Townsend S, et al. A microscale in vitro physiological model of the liver: predictive screens for drug metabolism and enzyme induction. Current Drug Metabolism, 2005, 6(6): 569-592.
|
|
|
[14] |
Xu T, Jin J, Gregory C, et al. Inkjet printing of viable mammalian cells. Biomaterials, 2005, 26(1): 93-99.
|
|
|
[15] |
Saunders R E, Gough J E, Derby B. Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing. Biomaterials, 2008, 29(2): 193-203.
|
|
|
[16] |
Xu T, Kincaid H, Atala A, et al. High-throughput production of single-cell microparticles using an inkjet printing technology. J Manufac Sci Eng, ASME Transactions, 2008,130: 0210171-0210175.
|
|
|
[17] |
Wilson W C, Boland T. Cell and organ printing 1: Protein and cell printers. Anat Rec A Discov Mol Cell Evol Biol, 2003, 272: 491-496.
|
|
|
[18] |
Abeyewickreme A, Kwok A, McEwan J R, et al. Bio-electrospraying embryonic stem cells: interrogating cellular viability and pluripotency. Integrative Biology, 2009,1(3): 260-266.
|
|
|
[19] |
Odenwalder PK, Irvine S, McEwan J R, et al. Bio-electrosprays: a novel electrified jetting methodology for the safe handling and deployment of primary living organisms. Biotechnol J, 2007, 2: 622-630.
|
|
|
[20] |
Patel P, Irvine S, McEwan J R, et al. Bio-protocols for directly forming active encapsulations containing living primary cells. Soft Matter, 2008, 4:1219-1229.
|
|
|
[21] |
Arumuganathar S, Irvine S, McEwan J R, et al. A novel direct aerodynamically assisted threading methodology for generating biologically viable microthreads encapsulating living primary cells. J Appl Polym Sci, 2008, 107: 1215-1225.
|
|
|
[22] |
Arumuganathar S, Irvine S, McEwan J R, et al. Aerodynamically assisted bio-jets: the development of a novel and direct non-electric field driven methodology for engineering living organisms. Biomed Mater: Mater Tissue Eng Regenerative Med, 2007, 2: 158-168.
|
|
|
[23] |
Chang R, Nam J, Sun W. Direct cell writing of 3d microorgan for in vitro pharmacokinetic model. Tissue Eng Part C Methods, 2008, 14: 157-166.
|
|
|
[24] |
Roberts A, Wyslouzil B E, Bonassar L. Aerosol delivery of mammalian cells for tissue engineering. Biotechnol Bioeng, 2005, 91: 801-807.
|
|
|
[25] |
Townsend-Nicholson A, Jayasinghe S N. Cell electrospinning: a unique biotechnique for encapsulating living organisms for generating active biological microthreads/scaffolds. Biomacromolecules, 2006, 7: 3364-3369.
|
|
|
[26] |
Demirci U, Montesano G. Cell encapsulating droplet vitrification. Lab Chip, 2007, 7: 1428-1433.
|
|
|
[27] |
Chen C Y, Barron J A, Ringeisen B R. Cell patterning without chemical surface modification: Cell-cell interactions between printed bovine aortic endothelial cells (BAEC) on a homogeneous cell-adherent hydrogel. Appl Surf Sci, 2006, 252: 8641-8645.
|
|
|
[28] |
Barron J A, Wu P, Ladouceur H D, et al. Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns. Biomed Microdevices, 2004, 6(2): 139-147.
|
|
|
[29] |
Barron J A, Spargo B J, Ringeisen B R. Biological laser printing of three dimensional cellular structures. Appl Phys A, 2004, 79: 1027-1030.
|
|
|
[30] |
Demirci U, Montesano G. Single cell epitaxy by acoustic picolitre droplets. Lab on a Chip, 2007, 7: 1139-1145.
|
|
|
[31] |
Cui X, Boland T. Human microvasculature fabrication using thermal inkjet printing technology. Biomaterials, 2009, 30(31): 6221-6227.
|
|
|
[32] |
Xu T, Gregory C A, Molnar P, et al. Viability and electrophysiology of neural cell structures generated by the inkjet printing method. Biomaterials, 2006, 27(19): 3580-3588.
|
|
|
[33] |
Boland T, Xu T, Damon B, et al.Application of inkjet printing to tissue engineering. Biotechnol J, 2006, 1. 910-917.
|
|
|
[34] |
Setti L, Fraleoni-Morgera A, Ballarin B, et al. An amperometric glucose biosensor prototype fabricated by thermal inkjet printing. Biosensors and Bioelectronics, 2005, 20: 2019-2026.
|
|
|
[35] |
Xu T, Zhao W X, Zhu J M, et al. Bio-printing of living organized tissues using an inkjet technology. Faseb Journal, 2007, 21(5): A636.
|
|
|
[36] |
Jayasinghe S N, Irvine S, McEwan J R. Cell electrospinning highly concentrated cellular suspensions containing primary living organisms into cell-bearing threads and scaffolds. Nanomedicine, 2007, 2: 555-567.
|
|
|
[37] |
Jayasinghe S, Qureshi A, Eagles P. Electrohydrodynamic jet processing: An advanced electric-field-driven jetting phenomenon for processing living cells. Small, 2006, 2(2): 216-219.
|
|
|
[38] |
Renn D J,Odde M J. Laser guided direct writing for applications in biotechnology. Trends Biotechnol, 1999, 17: 385-389.
|
|
|
[39] |
Colina M, Duocastella M, Fernandez-Pradas J M, et al. Laser-induced forward transfer of liquids: Study of the droplet ejection process. J Appl Phy, 2006, 99(8): 084909-084917.
|
|
|
[40] |
Ho PPB, Smausz T, Kresz N, et al. Survival and proliferative ability of various living cell types after laser-induced forward transfer. Tissue Eng, 2005, 11(11-12): 1817-1823.
|
|
|
[41] |
Barron J A, Wu P, Ladouceur H D, et al. Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns. Biomed Microdevices, 2004, 6(2): 139-147.
|
|
|
[42] |
Demirci U. Acoustic picoliter droplets for emerging applications in semiconductor industry and biotechnology. Journal of Microelectromechanical Systems, 2006, 15(4): 957-966.
|
|
|
[43] |
Demirci U,Montesano G. Cell encapsulating droplet vitrification. Lab Chip, 2007,7(11): 1428-1433.
|
|
|
[44] |
Jakab K, Neagu A, Mironov V, et al. Engineering biological structures of prescribed shape using self-assembling multicellular systems. Proc Natl Acad Sci, 2004, 101(9): 2864-2869.
|
|
|
[45] |
Lee W, Debasitis J C, Lee V K, et al. Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication. Biomaterials, 2009, 30(8): 1587-1595.
|
|
|
[46] |
Moon S, Hasan S, Song Y, et al. Layer by layer three-dimensional tissue epitaxy by cell-laden hydrogel droplets. Tissue Engineering Part C: Methods, 2009,10:0179-0189.
|
|
|
[47] |
Xu F, Moon S, Emre A E, et al. A droplet based building block approach for bladder smooth muscle cell (SMC) proliferation. Biofabrication, 2010,2(1):4105-4109.
|
|
|
[48] |
Pitchford S, Whole-cell functional assays - Cell-based, functional, rapid-throughput screening. Genetic Engineering News, 1998. 18(15): 38-39..
|
|
|
[49] |
Natarajan A, Molnar P, Sieverdes K, et al. Microelectrode array recordings of cardiac action potentials as a high throughput method to evaluate pesticide toxicity. Toxicology in Vitro, 2006, 20(3): 375-381.
|
|
|
[50] |
Xu F, Moon S, Emre A E, et al. Cell bioprinting as a potential High-throughout method for fabrication cell based biosensors. IEEE Sensors Conference,Christchurch,New Zealand,2009,387-391.
|
|
|
[51] |
Tibbitt M W,Anseth K S. Hydrogels as extracellular matrix mimics for 3D cell culture. Biotechnology and Bioengineering, 2009. 103(4): 655-663.
|
|
|
[52] |
Petersen O W, Ronnovjessen L, Howlett A R, et al. Interaction with basement membrane serves to rapidly distinguish growth and differentiation pattern of normal and malignant human breast epithelial cells. Proc Natl Acad Sci, 1992,89(19): 9064-9068.
|
|
|
[53] |
Tanaka H, Murphy C L, Murphy C, et al. Chondrogenic differentiation of murine embryonic stem cells: Effects of culture conditions and dexamethasone. Journal of Cellular Biochemistry, 2004, 93(3): 454-462.
|
|
|
[54] |
Cukierman E, Pankov R, Stevens D R, et al. Taking cell-matrix adhesions to the third dimension. Science, 2001. 294(5547): 1708-1712.
|
|
|
[55] |
Viravaidya K, Sin A, Shuler M L. Development of a microscale cell culture analog to probe naphthalene toxicity. Biotechnology Progress, 2004. 20(1): 316-323.
|
|
|
[56] |
Griffith L G,Swartz M A. Capturing complex 3D tissue physiology in vitro. Nat Rev Mol Cell Biol, 2006. 7(3): 211-224.
|
|
|
[57] |
Chang M, Stride E, Edirisinghe M. A novel process for drug encapsulation using a liquid to vapour phase change material. Soft Matter, 2009, 5(24): 5029-5036.
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|